PREVAL @ Chicago Aerosol is the manufacturer of an innovative, patented
Spray Gun. Branded as PREVAL, a versatile spray applicator for all
kinds of liquids. Each Preval Spray Gun comes with a refillable
container jar that can hold whatever fluid you choose and a power unit
that sprays up to 16 oz. of liquid, depending on viscosity. The power
units are disposable and recyclable aluminum. When depleted replace
with a new power unit. And best of all you can change jars for
different uses! Manufactured in Chicago, distributed around the world.
|
 |
|
 |
STEP 1
For small chips or cracks, no grinding or chiseling is required. For larger
chips or cracks, grind or sand out the damaged area using the #100 grit
sandpaper. |
|
 |
STEP 2
Mix a small amount of filler with cream hardener (6 parts filler to 1 part
hardener). Spread the filler into the damaged area. Allow the filler to dry
for 10 minutes. |
|
 |
STEP 3
Use #100 grit sandpaper to "wet" sand the filler until it is level with the
rest of the fixture. Then use #220, #400, #600 and #1000 sandpaper to "wet"
sand the repair area until it is smooth. |
|
 |
STEP 4
Dry your repair with a hair dryer to pull out any moisture before applying
finish paint. |
|
 |
STEP 5
Apply one drop of base paint to your fixture with your finger.
If the color matches, then no tint mixing is required. Wipe off the test area
with a paper towel. If the color does not match, refer to our color matching
instructions for tint mixing and color matching. |
|
 |
STEP 6
After matching the color, pour paint into atomizer and shake
thoroughly. Spray paint on repair and allow to dry 24 hours. Buff repair to
bring out shine and blend it in with the rest of your fixture. |
NOTE: This paint will NOT adhere to any surface that has not been sanded
or prepared. Do not worry about OVERSPRAY of paint on your fixture since it will
buff out, leaving only the sanded repair area painted.
EACH KIT CONTAINS:
- Complete instruction manual, including color matching instructions.
- Plastic spatula spreader for filler.
- 5 sheets of wet-dry sandpaper (#100, #220, #400, #600, #1000 grit).
- Preval atomizer sprayer.
- 1 ounce jar of filler.
- 1/4 ounce jar of cream hardener.
- Tint bottles (3 milliliters each).
- Base paint bottle (60 cc).
|
|
Home
| Contact Us | About Us
| Bath Kit | Testimonials | Quick Tips
How to Use Kit | Color
Matching | FAQ's |
Directions to our Office | Industry Links
|
ORDER KIT
TODAY!
BATH WIZARD,
INC.
447 South Sharon Amity Road, Suite 140
Charlotte, North Carolina 28211
� 2000 - 2004 Bath Wizard, Inc. All Rights Reserved. |
Telephone:(800) 498-7093
Email:
contact@bathwizard.com
Best viewed with latest version of
Internet Explore | |
Comments